Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 18.06.2025 00:03

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

A circuit breaker is similar, but is resettable.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

What is your review of "Regent", episode 5 of Season 2 House of the Dragon?

This device then solves the entire problem.

One is “what exactly is in a ‘surge protector’ ? ”

But it can get overloaded, and no longer works.

Psilocybin induces large-scale brain network reorganization, offering insights into the psychedelic state - PsyPost

but this device (an Inductor) … impedes the rapid changes in the current.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Should women be allowed in “combat roles” within the military?

a photo is worth a thousand words.

A fuse is a non-resetable over current circuit protector.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Nintendo Switch 2 hackers say they’re already getting banned - Polygon

Barnstars:

He then describes the function of a fuse.

The other is “what does a “fuse” do?”

Can you explain the difference between fissionable and fissile materials and their role in nuclear power reactors?

The bolt then partially travels down the line to your home.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

How do so-called Religious/Christian people really think homosexuality is even a sin? That would be nonsense. In fact, LGBT people need love instead of contempt/hatred. The word Homosexual didn't appear until the 1850s.

One

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

So, the voltage could go up to 500 volts, and the fuse will not open up.

Do you think the constitution and laws should be taught in school?

eight

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Why is there a "double standard" applied to sex between a dog and a human? Why is it that to many who are at least mildly okay with bestiality, a WOMAN having sex with a male dog is fine, but a guy with a female dog is not?

At least they know the answer if they wanted it.

Edit 2024–10.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Why were the Japanese soldiers in WW II so hesitant to surrender in battle?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

2024–10–10[John johnson John Johnson ]

There are two important concepts here.

Can you share something that captivates you, whether it's an idea, a discovery, or an invention?

This one hit behind the barn.

But… the neutral is now “floating” because of the 1 ohm resistance.

For this case there are devices called Metal oxide varistors (MOV).

NASA Releases Its Clearest Mars Images Yet – 140 Million Miles Away, And Everyone’s Noticing The Same Strange Thing - Indian Defence Review

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

The MOV will conduct when the voltage exceeds 50% of line voltage.

[old diagram got deleted by accident]

Is dating in college necessary? Why and why not?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Can the fuse protect the electronic devices from lightning instead of a surge protector.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

What is lightning?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

There are three different concepts here that are getting confused.

In schematic diagrams this is the symbol for a fuse:

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

2024–10–16 [ OO OLAOYE OYEBODE ]

First Sentence:

but I think this circuit , shows a few more pieces.

It seems Mohan does not understand the difference between a comment and an Answer.

what exactly is a ‘surge’ protector?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

[image of Common-mode choke]

This is where the MOV conducts again, and dissipated the energy.

Because the load is inductive, the current lags the voltage.(by a bit).

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

I post the exact comment here.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

An AC voltage/ current source, and an ac inductive load.

nine

Here is a simplified AC power diagram.

the problem then depends on "how fast does the fuse operate?".

He then asserts :

Upvotes:

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

At one ohm, the resistor has a maximum of 1 watt power.

These are simplified answers to the original question, and does not change anything I wrote above.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Now when you have a certain ac resistance, then a current flows in a loop.

The third is lightning and “how it gets conducted into a home.”

2024–10–14 [Omar Gharbi Omar Gharbi ]

He then describes Rainy Season and Lightning.

This is 'the assistant's answer'

These devices are installed between the “hot” and “neutral” and protective ground.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

What does a fuse do?

so, what happens?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

It also is a device that limits the change in current flow.

(Dc diagram shown, AC is similar).